Industrial Cladding Contractors in Telford and Shrewsbury
Request a Site Survey Send an Enquiry
No obligation. Just tell us about your building and we’ll be in touch.
IPAF · PASMA · CSCS · CITB · KeeLine approved installer
Telford was built around its industrial estates, and many of the units from the town’s early decades now have original roofs, wall cladding and gutters that need attention. Shrewsbury has a smaller but busy industrial base on its northern edge, plus business parks on the A5. ABS Cladding Services covers both, working on commercial and industrial buildings only, from our base in Wolverhampton just along the M54. With over 40 years’ experience, our cladding contractors in Telford and Shrewsbury help with planned maintenance, refurbishment, new build cladding and repairs.
Short-notice inspections are available across Telford, Shrewsbury and the surrounding area, subject to access and scheduling. For new developments in Telford and Shrewsbury, we install new build roof and wall cladding on commercial and industrial buildings, giving clients experienced installers from first elevations through to handover.
What our Telford cladding contractors cover
- Planned preventative maintenance (PPM) for single units, shared estates and multi-site portfolios
- Roof refurbishments, including over cladding, sheet and rooflight replacement, cut-edge corrosion treatment and coatings
- New build roof and wall cladding installation for commercial and industrial developments
- Free leak inspections and short-notice inspections
- Roof and cladding surveys for all roof types, including asbestos cement roofs, with photographic survey reports
- Gutter lining, gutter maintenance and cladding repairs
- Flat roofing, and roof safety lines and fall restraint systems
- Also available: fire doors (with fire door certificates), roller shutters and windows
Industrial cladding systems in Telford
Telford’s industrial estates have a mix of building types, from early profiled sheet units to modern composite-clad distribution sheds. We install and refurbish the industrial cladding systems these buildings need. These include built-up systems with a liner, insulation and outer sheet, insulated composite panels for roofs and walls, rainscreen cladding, flashings, rooflights and gutters.
Choosing the right cladding system depends on how the building is used, the condition of the frame and what the building needs to achieve on insulation, appearance and lifespan. We look at all of this at survey stage and recommend a system that suits the building. That applies whether it is a new build, an extension or a refurbishment of an existing unit in Hortonwood, Halesfield, Stafford Park or T54.
Recent Telford project: Filtermist headquarters
In Telford, we carried out new build industrial cladding, steel framing and curtain walling for the Filtermist headquarters. The project was a complete redevelopment of the site, including steel framing, external cladding systems and curtain walling, to create a modern commercial headquarters. See more of our work on our recent projects page.
New build roof and wall cladding installation
New build cladding is one of our three main services, alongside PPM and roof refurbishments. For developers and principal contractors in Telford and Shrewsbury, we install roof and wall cladding from first elevations through to handover, including flashings, gutters, rooflights, and roof safety lines and fall restraint systems. More detail is on our industrial cladding installation page.
Roof and cladding refurbishment
If the sheets are tired but the structure is sound, refurbishment usually beats replacement. Options include over cladding of roofs and walls, swapping out failed sheets and rooflights, treating cut-edge corrosion, renewing flashings, applying liquid coatings and flat roofing. Where asbestos cement roofs are present, over cladding may allow the existing roof to stay in place under the new covering. See industrial roof refurbishment.
Planned preventative maintenance (PPM)
Our PPM visits cover gutter and outlet clearing, checks on fixings, sealants, rooflights and flashings, small repairs while we are up there, and a dated photographic report afterwards. We run the same kind of programme across a group of NHS Supply Chain sites, so it scales from a single unit to a portfolio. Find out more about our industrial roofing maintenance programmes, or read our guides to cleaning industrial gutters before winter and industrial rooflight cleaning.
Leak investigation and roof surveys
Our roof leak investigation finds where the water is actually getting in, which may not be directly above the drip. We offer free leak inspections across Telford and Shrewsbury, often at short notice. For a full condition survey of a roof or a building’s cladding, our industrial roof and cladding site surveys cover all commercial and industrial roof types, including asbestos cement roofs, with a photographic survey report.
Gutters, cladding repairs and other services
Gutter lining and maintenance
We reline corroded gutters with a membrane or liquid gutter lining system and keep them clear on a regular schedule. Our guide on whether to replace or line an industrial gutter explains the choice.
Cladding repairs
This covers replacing damaged or corroded sheets, repairing composite panels and refixing anything that has worked loose.
Also available
We can also service, repair or replace fire doors, roller shutters and windows.
Relevant regional experience
Our work has included the Aico training centre in Oswestry, where we installed a new insulated roof system and micro-rib wall panels.
Local knowledge
Telford is about 17 miles from our office, along the M54. We work across Hortonwood in the north, Halesfield in the south, Stafford Park in the east and the newer T54 site near Junction 4. In Shrewsbury, we cover the Harlescott and Battlefield industrial areas, Shrewsbury Business Park at Emstrey and Oxon Business Park on the Welshpool Road. We also work across Wolverhampton and the wider West Midlands.
Telford and Shrewsbury cladding FAQs
Do you offer free leak inspections in Telford and Shrewsbury?
Yes. We offer free leak inspections, usually next day, for commercial and industrial buildings across Telford, Shrewsbury and the surrounding area.
What industrial cladding systems do you install?
We install built-up and composite panel roof and wall cladding, rainscreen cladding, flashings, gutters and rooflights for new buildings, extensions and refurbishments.
Can old cladding be refurbished instead of replaced?
Often, yes. If the structure is sound, over cladding, sheet replacement, cut-edge corrosion treatment and coatings can extend the life of the building without stripping it out.
How quickly can you get to Telford or Shrewsbury?
Telford is about 17 miles from our Wolverhampton office along the M54. We offer short-notice inspections, subject to access and scheduling.
Can you look after a shared estate with several tenants?
Yes. We can survey and maintain multiple units on one estate and report on each unit separately.
Book a free leak inspection
Book a free leak inspection anywhere in Telford, Shrewsbury or the surrounding area.
Request a Site Survey Send an Enquiry
No obligation. Just tell us about your building and we’ll be in touch.
IPAF · PASMA · CSCS · CITB · KeeLine approved installer